Modern consumer unit with the cover open

24 Hour Call Out Electricians

Fuse Board Repairs & Replacement in Rye

Your fuse board protects every circuit in the building. When it fails, buzzes, won't reset or is simply out of date, we repair or replace it so your home is protected again.

  • Emergency fuse board repairs
  • Consumer unit replacements and upgrades
  • Tested and certified on completion
  • Clear pricing before we start
Call 01797 000000

What we do

Fuse board work we carry out

From a single failed breaker to a full replacement, we'll tell you honestly which you need.

Failed breakers and RCDs

Breakers and RCDs that won't reset, trip for no reason or have stopped working are tested and replaced.

Heat and burn damage

Scorched, melted or burnt connections inside the board made safe and repaired or replaced.

Buzzing and crackling

Noise from the fuse board usually means a loose or failing connection. We find it and fix it.

Consumer unit upgrades

Old fuse boxes with rewireable fuses replaced with a modern consumer unit with RCD protection.

Moving or adding circuits

New circuits for extensions, kitchens or outbuildings added to the board safely.

After a failed EICR

If your report flags the fuse board, we can carry out the replacement and re-test.

Call 01797 000000Open 24/7 • With you in 30 to 90 minutes

The fault explained

Fuse boards explained

Your fuse board, or consumer unit, is the control centre of your electrical installation. Here's what it does, how it fails and what we do about it.

What's going on

The fuse board takes the incoming supply and divides it into separate circuits, each with its own protection. Circuit breakers (MCBs) switch off when a circuit is overloaded or shorts. RCDs switch off when current leaks to earth, protecting people from electric shock. Some boards use RCBOs, which combine both in one device for each circuit.

Older boards may have rewireable fuses, no RCD protection at all, or a plastic enclosure on a wooden backboard. Modern boards in homes have a non-combustible enclosure, usually metal, and RCD protection on most or all circuits.

The most common causes

  • Loose busbar and terminal connectionsConnections inside the board that aren't tight enough heat up, causing scorching and burning smells.
  • Worn-out devicesBreakers and RCDs that have tripped many times can fail to reset or trip for no reason.
  • Nuisance RCD trippingOne RCD covering many circuits can trip from several small leakages adding up.
  • WaterLeaks above or near the board can cause tracking, corrosion and dangerous faults.
  • OverloadingExtra circuits and higher loads added to an old board that was never designed for them.
  • Old and outdated boardsRewireable fuses and boards without RCD protection fall short of modern safety standards.

How we fix it

We start by testing the board and each circuit to find out whether a single device has failed or the board itself needs replacing. A failed breaker or RCD can often be replaced on the spot. Burnt connections are cut back, remade and tightened to the correct torque.

If the board is old, damaged or unsafe, we'll recommend a replacement. We test every circuit before fitting the new board, because a fault hidden by the old one will show up straight away on a modern RCD-protected board. Once it's in, every circuit is tested and you get the certificate for the work.

Call 01797 000000Spotted any of these signs? Call us straight away.

Is it time?

Signs your fuse board needs attention

If any of these sound familiar, it's worth getting your fuse board checked.

  1. Old fuses or a wooden back

    Rewireable fuses, a wooden backboard or a mix of old fuse boxes are signs the board is well past its best.

  2. No RCD protection

    Older boards often have no RCD, which is the device that cuts the power if someone gets a shock.

  3. Frequent trips or won't reset

    A board that trips often, or a switch that won't stay up, needs testing.

  4. Heat, buzzing or burning smells

    Switch off if it's safe to and call us straight away on 01797 000000.

Call 01797 000000Open 24/7 • With you in 30 to 90 minutes

Electrical emergency right now?

We're with you in 30 to 90 minutes, day or night.

Call 01797 000000

Consumer units

Fuse box, fuse board or consumer unit

Fuse box, fuse board, consumer unit, distribution board, RCD board: they're all names for the same thing, the box where your electricity supply is split into circuits and protected. Whatever you call yours, we repair, replace and upgrade them in Rye and the surrounding villages.

A fuse board replacement or consumer unit upgrade is the best way to bring an old installation up to modern safety standards with RCD protection. We also handle emergency fuse box repairs at any time, including failed RCDs, breakers that won't reset and boards with burn damage.

If you're looking for a fuse box upgrade, a new consumer unit, a fuse board change or an emergency electrician because your fuse box has failed, call our Rye electricians.

Call 01797 000000Open 24/7 • With you in 30 to 90 minutes

Questions

Frequently asked questions

How long does a fuse board replacement take?

Most homes take around a day. The power will be off while we work, and we'll tell you when to expect it back.

Do I need a new fuse board or just a repair?

Often a single breaker or RCD has failed and can be replaced. If the board is old, damaged or unsafe, we'll explain why a replacement is the better option.

Will I get a certificate?

Yes. A new consumer unit is tested on completion and you get the certificate for the work.

Can you come out if my fuse board fails at night?

Yes. We take emergency calls 24 hours a day and will make your fuse board safe and get the power back on where we can.

Call 01797 000000Can't find your answer? Call us, day or night.