
24 Hour Call Out Electricians
House Rewiring in Rye
Old or damaged wiring is behind many of the emergencies we're called to. When it's past repair, we replace it, from a single circuit to the whole property.
- Full and partial rewires
- After fire, flood or a failed EICR
- Tested and certified on completion
- Clear pricing before we start
When it's needed
Signs you may need a rewire
Wiring doesn't last forever. These are the most common reasons we recommend replacing it.
Old cable types
Rubber or fabric-covered cables, or old lead-sheathed wiring, are well past their safe life.
Overheating and scorching
Discoloured sockets, burning smells and warm switch plates can point to tired wiring.
Constant tripping
Circuits that keep tripping with no single faulty appliance often have deteriorating insulation.
Fire or flood damage
Wiring that has been through a fire or under water usually can't be trusted and needs replacing.
A failed EICR
If your report lists dangerous or potentially dangerous wiring, a rewire may be the right fix.
Renovations and extensions
Opening up walls and floors is the ideal time to bring the wiring up to date.
The fault explained
Rewiring explained
Wiring has a working life. Once it reaches the end of it, or it's been damaged beyond repair, replacing it is the only safe option. Here's how to tell, and what's involved.
What's going on
Most modern cable is PVC insulated and, installed properly, lasts for decades. Older properties may still have rubber-insulated, fabric-covered or lead-sheathed cable, which becomes brittle with age and can crumble when disturbed. Even PVC cable can be damaged by heat, rodents, water and poor workmanship.
A rewire doesn't always mean the whole house. If one or two circuits have failed or been damaged, a partial rewire of just those circuits may be all you need. Testing tells us which.
The most common causes
- AgeRubber and fabric insulation breaks down over time, leaving conductors exposed inside walls and floors.
- Heat damageCables run in hot spaces, covered by insulation or overloaded can soften and degrade.
- Fire and floodWiring that's been exposed to fire, smoke or flood water usually can't be relied on afterwards.
- Rodent damageChewed cables in lofts and under floors can affect whole runs of wiring.
- Poor alterationsYears of DIY extensions and add-ons can leave a circuit unsafe and impossible to repair properly.
- A failed EICRLow insulation resistance across many circuits often means the wiring has reached the end of its life.
How we fix it
We start with a survey: inspecting and testing the existing installation to see what can stay and what needs replacing. You get a written quote and a plan for the work. For a full rewire, new cables are run while floors and walls are open (the first fix), then sockets, switches, fittings and usually a new consumer unit are fitted (the second fix).
We work room by room where we can, so the house stays usable, and restore power at the end of each day wherever possible. When everything is in, every circuit is tested and you get the certificate for the work. We make good where the work needs it and leave the property tidy.
How it works
How a rewire works
A rewire is a big job, so we plan it to keep the disruption to a minimum.
Survey
We inspect and test the installation and tell you whether a full or partial rewire is needed.
Quote
You get a clear written price and a plan for the work, room by room.
First fix
New cables go in while floors and walls are open. We keep as much of the house usable as we can.
Second fix and test
Sockets, switches and fittings go on, then everything is tested and certified.
Electrical emergency right now?
We're with you in 30 to 90 minutes, day or night.
Rewires
House rewiring and rewires in Rye
A rewire, house rewire or rewiring job means replacing the electrical cables in a property, either for the whole house (a full rewire) or for just the circuits that need it (a partial rewire). It's usually needed for old wiring, after fire or flood damage, or when an EICR finds the wiring is unsafe.
We carry out full house rewiring and partial rewires in Rye's cottages, townhouses and newer homes, as well as rewiring for renovations and extensions. Every rewire is tested and certified on completion, and we can include a new consumer unit at the same time.
If you're looking for a rewiring electrician in Rye, Winchelsea, Camber or Northiam, or need old wiring replaced after an electrical emergency, call us for a survey and a clear quote.
Questions
Frequently asked questions
How long does a rewire take?
It depends on the size of the property. A typical home takes several days. We'll give you a timescale with the quote.
Can I live at home during a rewire?
Usually, yes. We work room by room and restore power at the end of each day wherever we can.
Can you rewire just part of the house?
Yes. If only some circuits are faulty or out of date, a partial rewire may be all you need.
Will there be mess?
Some, as cables go into walls and under floors. We keep it tidy and make good where the work needs it.
More help




