Electrician fitting a downlight by head torch

24 Hour Call Out Electricians

Lighting Repairs & Electrician in Rye

Lights out, flickering or tripping the power? We find the fault and get your lighting working again, indoors and out.

  • Total and partial lighting failure
  • Indoor, outdoor and security lighting
  • With you in 30 to 90 minutes
  • Clear pricing before we start
Call 01797 000000

What we fix

Lighting faults we put right

From a single fitting to a whole circuit, these are the lighting problems we deal with most.

All the lights out

A whole lighting circuit going off usually means a fault on that circuit. We trace and fix it.

Lights that trip the power

A light that trips the breaker when switched on often has a failed fitting or water in it.

Flickering and buzzing

Flicker and buzz can come from loose connections that heat up, so they're worth checking.

Outdoor and security lights

Garden, porch and security lights take a battering from the weather. We repair or replace them.

Switches and dimmers

Faulty switches and dimmers replaced, including ones that are warm or crackle when used.

New and replacement fittings

Downlights, pendants and outdoor lights fitted, replaced or upgraded to LED.

Call 01797 000000Open 24/7 • With you in 30 to 90 minutes

The fault explained

Lighting faults explained

Lighting circuits are simple, but they fail in a handful of predictable ways. Here's what goes wrong, why, and how we put it right.

What's going on

Lighting in most homes runs on one or two circuits, each protected by its own breaker. Power runs from the fuse board through ceiling roses, junction boxes and switches to each fitting. A fault anywhere along that route can take out one light, a room or the whole circuit.

Outdoor, bathroom and kitchen lighting is the most prone to faults, because it's exposed to moisture, steam and temperature changes. Downlights in ceilings also run hot, which can dry out cables and connections over time.

The most common causes

  • Failed lamps and driversA failing bulb or LED driver can short and trip the lighting circuit when switched on.
  • MoistureWater in outdoor, bathroom or loft fittings is one of the most common causes of lighting trips.
  • Loose connectionsConnections in ceiling roses, switches and junction boxes work loose, causing flicker and failure.
  • Heat damageFittings and lamps that run hot, especially old halogen downlights, can damage cables and terminals.
  • Incompatible dimmersDimmers not designed for LED lamps can cause flicker, buzzing and premature failure.
  • Damaged cablesCables in lofts and ceilings damaged by rodents or building work.

How we fix it

We start by checking whether the problem is one fitting or the whole circuit. If the circuit is tripping, we disconnect sections of it to find which fitting or run of cable is responsible, and test insulation resistance to find leakage or moisture.

Faulty lamps, drivers and fittings are replaced, wet fittings are dried out, sealed or replaced with properly rated ones, and loose connections are remade. Where dimmers and LEDs don't match, we fit compatible parts. Old halogen downlights can be replaced with cooler-running LED fittings. Everything is tested before we leave.

Call 01797 000000Spotted any of these signs? Call us straight away.

Quick checks

Before you call

These checks are safe to do yourself and can save you a callout.

  1. Check the bulb

    Try a bulb you know works. If it's only one light, the lamp may simply have failed.

  2. Look at the fuse board

    See if the lighting circuit has tripped. Reset it once only.

  3. Leave it off if it trips again

    If it trips straight away, there's a fault. Don't keep resetting it.

  4. Call us

    If the lights won't come back on, or a fitting is scorched or buzzing, ring 01797 000000.

Call 01797 000000Open 24/7 • With you in 30 to 90 minutes

Electrical emergency right now?

We're with you in 30 to 90 minutes, day or night.

Call 01797 000000

Lights

Lighting electrician for every fitting

Whether you need a lighting electrician, someone to fix a light fitting or an electrician for lights that keep tripping, we repair and install lighting of all kinds in Rye: ceiling lights, downlights, LED lighting, outdoor lights, garden lighting and security lights.

Common lighting problems we're called out for include lights not working, flickering lights, a light switch that sparks or buzzes, outdoor lights tripping the power in the rain, and a whole lighting circuit going off. Our emergency electricians can attend out of hours when you're left in the dark.

We also fit new light fittings and LED downlight upgrades, replace switches and dimmers, and install outdoor and security lighting, across Rye and the surrounding villages.

Call 01797 000000Open 24/7 • With you in 30 to 90 minutes

Questions

Frequently asked questions

Why do my lights keep tripping the power?

Usually a failed fitting, a blown lamp that has shorted, or moisture in an outdoor or bathroom light. We find which.

Is a flickering light dangerous?

Not always, but flicker can come from a loose connection that's heating up. If it buzzes or the fitting is warm, switch it off and call us.

Can you fix outdoor lights in the rain?

We'll always make them safe straight away. Some repairs are best finished once the fitting is dry.

Do you fit LED lighting?

Yes. We can replace old fittings with LED, which uses less power and runs cooler.

Call 01797 000000Can't find your answer? Call us, day or night.